The automobile fault code U0126 indicates a problem with the Controller Area Network (CAN) Communication System or the Steering Angle Sensor Module. The symptoms of this fault code are not specific, but it can cause issues with the vehicle’s stability control system. The cause of this fault code can be a faulty CAN Communication System, a faulty Steering Angle Sensor Module, an open or shorted harness, or a poor electrical connection.
The importance of repairing this fault code lies in the fact that it can affect the vehicle’s safety systems. The repair difficulty is moderate, and the fix involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for broken, bent, pushed out, or corroded connector pins.
The repair time for this fault code is estimated to be around 1.0 hour. It is essential to interpret the fault code correctly to ensure the proper repair is made.Repair Importance Level 10.0 (Out of 10) Estimated Repair Time Approximately 1.0 hour Repair Difficulty Level 10.0 (Out of 10)
Decoding U0126: Common Symptoms Of This Fault Code
Here are some symptoms that may indicate the presence of the automobile fault code u0126:
- The U0126 fault code is related to the ABS module communication circuit.
- Symptoms of this fault code include the ABS warning light turning on, the traction control system not working properly, the speedometer not working, the cruise control not working, and the transmission shifting poorly.
- Additionally, the vehicle may experience a loss of power and reduced fuel efficiency.
- It is important to address this issue promptly to ensure safe driving conditions and prevent further damage to the vehicle.
Decoding U0126: Common Causes Of Fault Code
The automobile fault code u0126 can be caused by various factors, including…
- The automobile fault code u0126 can be caused by a faulty Controller Area Network (CAN) Communication System.
- It can also be caused by a faulty Steering Angle Sensor Module.
- Another cause of this fault code is when the Steering Angle Sensor Module harness is open or shorted.
- Lastly, a poor electrical connection in the Steering Angle Sensor Module circuit can also trigger this fault code.
Fix U0126 Code: Simple Steps To Get Your Car Running
To fix the u0126 fault code, check the possible causes and inspect the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code u0126, first, check the possible causes listed above.
- Then, visually inspect the related wiring harness and connectors.
- Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins.
- This fix will take an estimated repair time of 1.0 hour.
Crunching The Numbers: U0126 Repair Cost & Complexity
The automobile fault code U0126 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of repair is influenced by the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour. Therefore, the total cost of diagnosis and fixing the U0126 fault code will depend on the hourly rate charged by the auto repair shop and the estimated repair time.
Decoding U0126: Symptoms And Causes
The fault code u0126 is related to the communication between the vehicle’s control modules.
When this code appears, the engine light or service engine soon warning light will turn on.This fault code indicates that there is a problem with the communication circuit between the control modules.It is important to address this issue as soon as possible, as it can affect the performance and safety of the vehicle.
A professional mechanic should be consulted to diagnose and repair the issue.
FAQ
What are the possible causes of the u0126 automobile fault code?
The u0126 automobile fault code can be caused by a faulty Controller Area Network (CAN) Communication System, a faulty Steering Angle Sensor Module, an open or shorted Steering Angle Sensor Module harness, or a poor electrical connection in the Steering Angle Sensor Module circuit. To fix this issue, one should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.
How can one fix the u0126 automobile fault code?
If you encounter the u0126 automobile fault code, check for a faulty Controller Area Network (CAN) Communication System, a faulty Steering Angle Sensor Module, an open or shorted Steering Angle Sensor Module harness, or a poor electrical connection in the Steering Angle Sensor Module circuit. Visually inspect the related wiring harness and connectors, and check for damaged components. Look for broken, bent, pushed out, or corroded connector’s pins to fix the issue.
What should be visually inspected when trying to fix the u0126 automobile fault code?
When trying to fix the u0126 automobile fault code, it is important to visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. This fault code can be caused by a faulty Controller Area Network (CAN) Communication System, faulty Steering Angle Sensor Module, Steering Angle Sensor Module harness that is open or shorted, or a poor electrical connection in the Steering Angle Sensor Module circuit. Check the “Possible Causes” listed above to determine the root cause of the issue.
![[SOLVED] Fix U0126 Code: Reconnect Steering Angle Sensor Module (1)](https://i0.wp.com/carmodnerd.com/wp-content/uploads/2023/06/U0126-error-fault-code.jpg "[SOLVED] Fix U0126 Code: Reconnect Steering Angle Sensor Module (1)")
Wrap Up
To fix the u0126 fault code, check the CAN communication system, steering angle sensor module, and related wiring harness and connectors.
Visually inspect for damage and check for broken, bent, pushed out, or corroded connector pins.
![[SOLVED] Fix U0126 Code: Reconnect Steering Angle Sensor Module (2024)](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAEAAAABCAQAAAC1HAwCAAAAC0lEQVR42mP8/h8AAvMB+NzmkbcAAAAASUVORK5CYII=)